| /linux/mm/ |
| H A D | mm_init.c | diff dcdfdd40fa82b6704d2841938e5c8ec3051eb0d6 Tue Jun 06 16:26:29 CEST 2023 Kirill A. Shutemov <kirill.shutemov@linux.intel.com> mm: Add support for unaccepted memory
UEFI Specification version 2.9 introduces the concept of memory
acceptance. Some Virtual Machine platforms, such as Intel TDX or AMD
SEV-SNP, require memory to be accepted before it can be used by the
guest. Accepting happens via a protocol specific to the Virtual Machine
platform.
There are several ways the kernel can deal with unaccepted memory:
1. Accept all the memory during boot. It is easy to implement and it
doesn't have runtime cost once the system is booted. The downside is
very long boot time.
Accept can be parallelized to multiple CPUs to keep it manageable
(i.e. via DEFERRED_STRUCT_PAGE_INIT), but it tends to saturate
memory bandwidth and does not scale beyond the point.
2. Accept a block of memory on the first use. It requires more
infrastructure and changes in page allocator to make it work, but
it provides good boot time.
On-demand memory accept means latency spikes every time kernel steps
onto a new memory block. The spikes will go away once workload data
set size gets stabilized or all memory gets accepted.
3. Accept all memory in background. Introduce a thread (or multiple)
that gets memory accepted proactively. It will minimize time the
system experience latency spikes on memory allocation while keeping
low boot time.
This approach cannot function on its own. It is an extension of #2:
background memory acceptance requires functional scheduler, but the
page allocator may need to tap into unaccepted memory before that.
The downside of the approach is that these threads also steal CPU
cycles and memory bandwidth from the user's workload and may hurt
user experience.
Implement #1 and #2 for now. #2 is the default. Some workloads may want
to use #1 with accept_memory=eager in kernel command line. #3 can be
implemented later based on user's demands.
Support of unaccepted memory requires a few changes in core-mm code:
- memblock accepts memory on allocation. It serves early boot memory
allocations and doesn't limit them to pre-accepted pool of memory.
- page allocator accepts memory on the first allocation of the page.
When kernel runs out of accepted memory, it accepts memory until the
high watermark is reached. It helps to minimize fragmentation.
EFI code will provide two helpers if the platform supports unaccepted
memory:
- accept_memory() makes a range of physical addresses accepted.
- range_contains_unaccepted_memory() checks anything within the range
of physical addresses requires acceptance.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport <rppt@linux.ibm.com> # memblock
Link: https://lore.kernel.org/r/20230606142637.5171-2-kirill.shutemov@linux.intel.com
|
| H A D | memblock.c | diff dcdfdd40fa82b6704d2841938e5c8ec3051eb0d6 Tue Jun 06 16:26:29 CEST 2023 Kirill A. Shutemov <kirill.shutemov@linux.intel.com> mm: Add support for unaccepted memory
UEFI Specification version 2.9 introduces the concept of memory
acceptance. Some Virtual Machine platforms, such as Intel TDX or AMD
SEV-SNP, require memory to be accepted before it can be used by the
guest. Accepting happens via a protocol specific to the Virtual Machine
platform.
There are several ways the kernel can deal with unaccepted memory:
1. Accept all the memory during boot. It is easy to implement and it
doesn't have runtime cost once the system is booted. The downside is
very long boot time.
Accept can be parallelized to multiple CPUs to keep it manageable
(i.e. via DEFERRED_STRUCT_PAGE_INIT), but it tends to saturate
memory bandwidth and does not scale beyond the point.
2. Accept a block of memory on the first use. It requires more
infrastructure and changes in page allocator to make it work, but
it provides good boot time.
On-demand memory accept means latency spikes every time kernel steps
onto a new memory block. The spikes will go away once workload data
set size gets stabilized or all memory gets accepted.
3. Accept all memory in background. Introduce a thread (or multiple)
that gets memory accepted proactively. It will minimize time the
system experience latency spikes on memory allocation while keeping
low boot time.
This approach cannot function on its own. It is an extension of #2:
background memory acceptance requires functional scheduler, but the
page allocator may need to tap into unaccepted memory before that.
The downside of the approach is that these threads also steal CPU
cycles and memory bandwidth from the user's workload and may hurt
user experience.
Implement #1 and #2 for now. #2 is the default. Some workloads may want
to use #1 with accept_memory=eager in kernel command line. #3 can be
implemented later based on user's demands.
Support of unaccepted memory requires a few changes in core-mm code:
- memblock accepts memory on allocation. It serves early boot memory
allocations and doesn't limit them to pre-accepted pool of memory.
- page allocator accepts memory on the first allocation of the page.
When kernel runs out of accepted memory, it accepts memory until the
high watermark is reached. It helps to minimize fragmentation.
EFI code will provide two helpers if the platform supports unaccepted
memory:
- accept_memory() makes a range of physical addresses accepted.
- range_contains_unaccepted_memory() checks anything within the range
of physical addresses requires acceptance.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport <rppt@linux.ibm.com> # memblock
Link: https://lore.kernel.org/r/20230606142637.5171-2-kirill.shutemov@linux.intel.com
|
| H A D | vmstat.c | diff dcdfdd40fa82b6704d2841938e5c8ec3051eb0d6 Tue Jun 06 16:26:29 CEST 2023 Kirill A. Shutemov <kirill.shutemov@linux.intel.com> mm: Add support for unaccepted memory
UEFI Specification version 2.9 introduces the concept of memory
acceptance. Some Virtual Machine platforms, such as Intel TDX or AMD
SEV-SNP, require memory to be accepted before it can be used by the
guest. Accepting happens via a protocol specific to the Virtual Machine
platform.
There are several ways the kernel can deal with unaccepted memory:
1. Accept all the memory during boot. It is easy to implement and it
doesn't have runtime cost once the system is booted. The downside is
very long boot time.
Accept can be parallelized to multiple CPUs to keep it manageable
(i.e. via DEFERRED_STRUCT_PAGE_INIT), but it tends to saturate
memory bandwidth and does not scale beyond the point.
2. Accept a block of memory on the first use. It requires more
infrastructure and changes in page allocator to make it work, but
it provides good boot time.
On-demand memory accept means latency spikes every time kernel steps
onto a new memory block. The spikes will go away once workload data
set size gets stabilized or all memory gets accepted.
3. Accept all memory in background. Introduce a thread (or multiple)
that gets memory accepted proactively. It will minimize time the
system experience latency spikes on memory allocation while keeping
low boot time.
This approach cannot function on its own. It is an extension of #2:
background memory acceptance requires functional scheduler, but the
page allocator may need to tap into unaccepted memory before that.
The downside of the approach is that these threads also steal CPU
cycles and memory bandwidth from the user's workload and may hurt
user experience.
Implement #1 and #2 for now. #2 is the default. Some workloads may want
to use #1 with accept_memory=eager in kernel command line. #3 can be
implemented later based on user's demands.
Support of unaccepted memory requires a few changes in core-mm code:
- memblock accepts memory on allocation. It serves early boot memory
allocations and doesn't limit them to pre-accepted pool of memory.
- page allocator accepts memory on the first allocation of the page.
When kernel runs out of accepted memory, it accepts memory until the
high watermark is reached. It helps to minimize fragmentation.
EFI code will provide two helpers if the platform supports unaccepted
memory:
- accept_memory() makes a range of physical addresses accepted.
- range_contains_unaccepted_memory() checks anything within the range
of physical addresses requires acceptance.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport <rppt@linux.ibm.com> # memblock
Link: https://lore.kernel.org/r/20230606142637.5171-2-kirill.shutemov@linux.intel.com
|
| H A D | page_alloc.c | diff dcdfdd40fa82b6704d2841938e5c8ec3051eb0d6 Tue Jun 06 16:26:29 CEST 2023 Kirill A. Shutemov <kirill.shutemov@linux.intel.com> mm: Add support for unaccepted memory
UEFI Specification version 2.9 introduces the concept of memory
acceptance. Some Virtual Machine platforms, such as Intel TDX or AMD
SEV-SNP, require memory to be accepted before it can be used by the
guest. Accepting happens via a protocol specific to the Virtual Machine
platform.
There are several ways the kernel can deal with unaccepted memory:
1. Accept all the memory during boot. It is easy to implement and it
doesn't have runtime cost once the system is booted. The downside is
very long boot time.
Accept can be parallelized to multiple CPUs to keep it manageable
(i.e. via DEFERRED_STRUCT_PAGE_INIT), but it tends to saturate
memory bandwidth and does not scale beyond the point.
2. Accept a block of memory on the first use. It requires more
infrastructure and changes in page allocator to make it work, but
it provides good boot time.
On-demand memory accept means latency spikes every time kernel steps
onto a new memory block. The spikes will go away once workload data
set size gets stabilized or all memory gets accepted.
3. Accept all memory in background. Introduce a thread (or multiple)
that gets memory accepted proactively. It will minimize time the
system experience latency spikes on memory allocation while keeping
low boot time.
This approach cannot function on its own. It is an extension of #2:
background memory acceptance requires functional scheduler, but the
page allocator may need to tap into unaccepted memory before that.
The downside of the approach is that these threads also steal CPU
cycles and memory bandwidth from the user's workload and may hurt
user experience.
Implement #1 and #2 for now. #2 is the default. Some workloads may want
to use #1 with accept_memory=eager in kernel command line. #3 can be
implemented later based on user's demands.
Support of unaccepted memory requires a few changes in core-mm code:
- memblock accepts memory on allocation. It serves early boot memory
allocations and doesn't limit them to pre-accepted pool of memory.
- page allocator accepts memory on the first allocation of the page.
When kernel runs out of accepted memory, it accepts memory until the
high watermark is reached. It helps to minimize fragmentation.
EFI code will provide two helpers if the platform supports unaccepted
memory:
- accept_memory() makes a range of physical addresses accepted.
- range_contains_unaccepted_memory() checks anything within the range
of physical addresses requires acceptance.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport <rppt@linux.ibm.com> # memblock
Link: https://lore.kernel.org/r/20230606142637.5171-2-kirill.shutemov@linux.intel.com
|
| /linux/fs/proc/ |
| H A D | meminfo.c | diff dcdfdd40fa82b6704d2841938e5c8ec3051eb0d6 Tue Jun 06 16:26:29 CEST 2023 Kirill A. Shutemov <kirill.shutemov@linux.intel.com> mm: Add support for unaccepted memory
UEFI Specification version 2.9 introduces the concept of memory
acceptance. Some Virtual Machine platforms, such as Intel TDX or AMD
SEV-SNP, require memory to be accepted before it can be used by the
guest. Accepting happens via a protocol specific to the Virtual Machine
platform.
There are several ways the kernel can deal with unaccepted memory:
1. Accept all the memory during boot. It is easy to implement and it
doesn't have runtime cost once the system is booted. The downside is
very long boot time.
Accept can be parallelized to multiple CPUs to keep it manageable
(i.e. via DEFERRED_STRUCT_PAGE_INIT), but it tends to saturate
memory bandwidth and does not scale beyond the point.
2. Accept a block of memory on the first use. It requires more
infrastructure and changes in page allocator to make it work, but
it provides good boot time.
On-demand memory accept means latency spikes every time kernel steps
onto a new memory block. The spikes will go away once workload data
set size gets stabilized or all memory gets accepted.
3. Accept all memory in background. Introduce a thread (or multiple)
that gets memory accepted proactively. It will minimize time the
system experience latency spikes on memory allocation while keeping
low boot time.
This approach cannot function on its own. It is an extension of #2:
background memory acceptance requires functional scheduler, but the
page allocator may need to tap into unaccepted memory before that.
The downside of the approach is that these threads also steal CPU
cycles and memory bandwidth from the user's workload and may hurt
user experience.
Implement #1 and #2 for now. #2 is the default. Some workloads may want
to use #1 with accept_memory=eager in kernel command line. #3 can be
implemented later based on user's demands.
Support of unaccepted memory requires a few changes in core-mm code:
- memblock accepts memory on allocation. It serves early boot memory
allocations and doesn't limit them to pre-accepted pool of memory.
- page allocator accepts memory on the first allocation of the page.
When kernel runs out of accepted memory, it accepts memory until the
high watermark is reached. It helps to minimize fragmentation.
EFI code will provide two helpers if the platform supports unaccepted
memory:
- accept_memory() makes a range of physical addresses accepted.
- range_contains_unaccepted_memory() checks anything within the range
of physical addresses requires acceptance.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport <rppt@linux.ibm.com> # memblock
Link: https://lore.kernel.org/r/20230606142637.5171-2-kirill.shutemov@linux.intel.com
|
| /linux/drivers/base/ |
| H A D | node.c | diff dcdfdd40fa82b6704d2841938e5c8ec3051eb0d6 Tue Jun 06 16:26:29 CEST 2023 Kirill A. Shutemov <kirill.shutemov@linux.intel.com> mm: Add support for unaccepted memory
UEFI Specification version 2.9 introduces the concept of memory
acceptance. Some Virtual Machine platforms, such as Intel TDX or AMD
SEV-SNP, require memory to be accepted before it can be used by the
guest. Accepting happens via a protocol specific to the Virtual Machine
platform.
There are several ways the kernel can deal with unaccepted memory:
1. Accept all the memory during boot. It is easy to implement and it
doesn't have runtime cost once the system is booted. The downside is
very long boot time.
Accept can be parallelized to multiple CPUs to keep it manageable
(i.e. via DEFERRED_STRUCT_PAGE_INIT), but it tends to saturate
memory bandwidth and does not scale beyond the point.
2. Accept a block of memory on the first use. It requires more
infrastructure and changes in page allocator to make it work, but
it provides good boot time.
On-demand memory accept means latency spikes every time kernel steps
onto a new memory block. The spikes will go away once workload data
set size gets stabilized or all memory gets accepted.
3. Accept all memory in background. Introduce a thread (or multiple)
that gets memory accepted proactively. It will minimize time the
system experience latency spikes on memory allocation while keeping
low boot time.
This approach cannot function on its own. It is an extension of #2:
background memory acceptance requires functional scheduler, but the
page allocator may need to tap into unaccepted memory before that.
The downside of the approach is that these threads also steal CPU
cycles and memory bandwidth from the user's workload and may hurt
user experience.
Implement #1 and #2 for now. #2 is the default. Some workloads may want
to use #1 with accept_memory=eager in kernel command line. #3 can be
implemented later based on user's demands.
Support of unaccepted memory requires a few changes in core-mm code:
- memblock accepts memory on allocation. It serves early boot memory
allocations and doesn't limit them to pre-accepted pool of memory.
- page allocator accepts memory on the first allocation of the page.
When kernel runs out of accepted memory, it accepts memory until the
high watermark is reached. It helps to minimize fragmentation.
EFI code will provide two helpers if the platform supports unaccepted
memory:
- accept_memory() makes a range of physical addresses accepted.
- range_contains_unaccepted_memory() checks anything within the range
of physical addresses requires acceptance.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport <rppt@linux.ibm.com> # memblock
Link: https://lore.kernel.org/r/20230606142637.5171-2-kirill.shutemov@linux.intel.com
|
| /linux/include/linux/ |
| H A D | mmzone.h | diff dcdfdd40fa82b6704d2841938e5c8ec3051eb0d6 Tue Jun 06 16:26:29 CEST 2023 Kirill A. Shutemov <kirill.shutemov@linux.intel.com> mm: Add support for unaccepted memory
UEFI Specification version 2.9 introduces the concept of memory
acceptance. Some Virtual Machine platforms, such as Intel TDX or AMD
SEV-SNP, require memory to be accepted before it can be used by the
guest. Accepting happens via a protocol specific to the Virtual Machine
platform.
There are several ways the kernel can deal with unaccepted memory:
1. Accept all the memory during boot. It is easy to implement and it
doesn't have runtime cost once the system is booted. The downside is
very long boot time.
Accept can be parallelized to multiple CPUs to keep it manageable
(i.e. via DEFERRED_STRUCT_PAGE_INIT), but it tends to saturate
memory bandwidth and does not scale beyond the point.
2. Accept a block of memory on the first use. It requires more
infrastructure and changes in page allocator to make it work, but
it provides good boot time.
On-demand memory accept means latency spikes every time kernel steps
onto a new memory block. The spikes will go away once workload data
set size gets stabilized or all memory gets accepted.
3. Accept all memory in background. Introduce a thread (or multiple)
that gets memory accepted proactively. It will minimize time the
system experience latency spikes on memory allocation while keeping
low boot time.
This approach cannot function on its own. It is an extension of #2:
background memory acceptance requires functional scheduler, but the
page allocator may need to tap into unaccepted memory before that.
The downside of the approach is that these threads also steal CPU
cycles and memory bandwidth from the user's workload and may hurt
user experience.
Implement #1 and #2 for now. #2 is the default. Some workloads may want
to use #1 with accept_memory=eager in kernel command line. #3 can be
implemented later based on user's demands.
Support of unaccepted memory requires a few changes in core-mm code:
- memblock accepts memory on allocation. It serves early boot memory
allocations and doesn't limit them to pre-accepted pool of memory.
- page allocator accepts memory on the first allocation of the page.
When kernel runs out of accepted memory, it accepts memory until the
high watermark is reached. It helps to minimize fragmentation.
EFI code will provide two helpers if the platform supports unaccepted
memory:
- accept_memory() makes a range of physical addresses accepted.
- range_contains_unaccepted_memory() checks anything within the range
of physical addresses requires acceptance.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport <rppt@linux.ibm.com> # memblock
Link: https://lore.kernel.org/r/20230606142637.5171-2-kirill.shutemov@linux.intel.com
|
| H A D | mm.h | diff dcdfdd40fa82b6704d2841938e5c8ec3051eb0d6 Tue Jun 06 16:26:29 CEST 2023 Kirill A. Shutemov <kirill.shutemov@linux.intel.com> mm: Add support for unaccepted memory
UEFI Specification version 2.9 introduces the concept of memory
acceptance. Some Virtual Machine platforms, such as Intel TDX or AMD
SEV-SNP, require memory to be accepted before it can be used by the
guest. Accepting happens via a protocol specific to the Virtual Machine
platform.
There are several ways the kernel can deal with unaccepted memory:
1. Accept all the memory during boot. It is easy to implement and it
doesn't have runtime cost once the system is booted. The downside is
very long boot time.
Accept can be parallelized to multiple CPUs to keep it manageable
(i.e. via DEFERRED_STRUCT_PAGE_INIT), but it tends to saturate
memory bandwidth and does not scale beyond the point.
2. Accept a block of memory on the first use. It requires more
infrastructure and changes in page allocator to make it work, but
it provides good boot time.
On-demand memory accept means latency spikes every time kernel steps
onto a new memory block. The spikes will go away once workload data
set size gets stabilized or all memory gets accepted.
3. Accept all memory in background. Introduce a thread (or multiple)
that gets memory accepted proactively. It will minimize time the
system experience latency spikes on memory allocation while keeping
low boot time.
This approach cannot function on its own. It is an extension of #2:
background memory acceptance requires functional scheduler, but the
page allocator may need to tap into unaccepted memory before that.
The downside of the approach is that these threads also steal CPU
cycles and memory bandwidth from the user's workload and may hurt
user experience.
Implement #1 and #2 for now. #2 is the default. Some workloads may want
to use #1 with accept_memory=eager in kernel command line. #3 can be
implemented later based on user's demands.
Support of unaccepted memory requires a few changes in core-mm code:
- memblock accepts memory on allocation. It serves early boot memory
allocations and doesn't limit them to pre-accepted pool of memory.
- page allocator accepts memory on the first allocation of the page.
When kernel runs out of accepted memory, it accepts memory until the
high watermark is reached. It helps to minimize fragmentation.
EFI code will provide two helpers if the platform supports unaccepted
memory:
- accept_memory() makes a range of physical addresses accepted.
- range_contains_unaccepted_memory() checks anything within the range
of physical addresses requires acceptance.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport <rppt@linux.ibm.com> # memblock
Link: https://lore.kernel.org/r/20230606142637.5171-2-kirill.shutemov@linux.intel.com
|